Narda Safety Test Solutions S.r.l. Leader on Electromagnetic Compatibility and EMC EMI Receiver  
   English  Italiano
PMM a Brand of Narda Safety Test Solutions S.r.l. Electromagnetic Compatibility EMC EMI Instruments
  Conducted Immunity

PMM  Cond-IS - RF Conducted Immunity SystemPMM
NARDA Italy has renewed its already well known PMM 6000S/10 RF Immunity System with components and test management software to follow and even overcome latest requirements from the Standard IEC/EN 61000-4-6 and IEC/EN 61000-4-3.
Continuing with the philosophy of a "Modular Approach", which still provides several advantages for actual use and future upgrades of the system when compared to "compact" solutions, main innovations are represented by a completely redesigned software (PIMS), introduction of the new RF Generators PMM 3010 or 3030 and the True RMS Power Meter PMM 6630, all of them remotely driven through USB Ports by any PC.
PMM 6630 power meter can be operated up to 3 GHz, so representing an ideal companion for Radiated Immunity applications as well, in particular when matched to the same frequency range provided by the RF Generator model PMM 3030.

Product description PDF formatEnglish

PMM  PMM Immunity Suite SoftwareTop of page PMM

PIMS - PMM Immunity Suite Software

The new "PMM Immunity Suite" (PIMS) software, accurately designed in terms of functions and user friendly approach, can manage the whole range of PMM components during both Test and Calibration processes, introducing the possibility of looking at the various monitoring tracks from generator, power meters and field sensors. The software is user friendly and provides a really ergonomic configuration which comfortably drives the operator through the various steps, from definition and selection of HW components to settings of required parameters and finally starting the test with "just one button". Program window has been designed for omni-comprehensive overview of each specific test being performed, so that operator can easily control all details with a quick glance. A graphical scheme of the test set-up clearly reminds about proper physical connections between components, which could slightly differ between Tests and Devices' Calibrations.
In case of Radiated Immunity Tests according to IEC/EN 61000-4-3 in Anechoic Chambers or TEM/GTEM Cells, PIMS does also include calibration of radiated field up to 16 points in the grid of Field Uniformity assurance, providing "Amplifier Saturation Check" routine for proper amplifier/antenna matching verification at 80% AM Modulation increased power.

Product description PDF format : English

PMM  3030 - EMC Wide Band RF Generator, 9 kHz - 3 GHzTop of page PMM
PMM  3010 - EMC Wide Band RF Generator, 9 kHz - 1 GHzTop of pagePMM
PMM 3030  
PMM 3030 is a powerful wide band RF signal generator, ideal for all EMC immunity test applications that has been designed adopting an innovative philosophy and state-of-art components. The model equipped with plug-in, rechargeable battery pack allows for ground loops-free operation and true portability. PMM 3030 features a particularly user-friendly interface based on a clear, bright display and function keys conveniently arranged. All settings can be done by the front panel keyboard and rotary knob.
  • PMM 3030 9 kHz to 3 GHz frequency range
  • PMM 3010 9 kHz to 1 GHz frequency range
  • -107 to +10 dBm RF output
  • Internal AM and pulse modulation
  • Battery operation (mod. 3030-02)
  • RS232/USB communication
  • GPIB with external adapter

Product description PDF formatEnglish

PMM 3030
Frequency range
9 kHz – 3 GHz
Frequency resolution
1 kHz
Frequency accuracy
± 10 ppm
Level range
-107 to +10 dBm
Level resolution
0.1 dB
Level accuracy
± 1 dB, level > -30 dBm
Output impedance
50& nbsp;ohm
RF output connector
N female
Spectral purity -harmonic
< -30 dBc @ 0 dBm, f > 1 MHz
AM modulation, internal
2 – 50 – 400 Hz, 1 kHz; 10% to 90%
AM modulation, external
2 Hz to 10 kHz; 10% to 90%
Input impedance
600 ohm
Input connector
BNC female
Internal pulse modulation
1 Hz: ON/OFF ratio @ 0 dBm > 40 dB 200 Hz: ON/OFF ratio @ 0 dBm > 40 dB
Remote control
RS-232, USB 2.0 (rear), User Port GPIB (external adapter)
User Port
RF OFF, RF ON, Start/stop test
340 x 240 pixels, 16 gray levels
Display units
dBm, dBuV
Operating temperature
+10°C ÷ +40°C
Power supply
DC 10 – 15 V, 2.5 A
AC – DC adapter 115 – 230 V 50/60 Hz
Plug-in Battery pack (model 3030-02)
Li-Ion, rechargeable 3 h operation time (avg)
235 x 105 x 335 mm (WxHxD)
3.5 kg (mod. 3030-01) 4.3 kg (mod. 3030-02)

PMM  6000NTop of page - RF Power Amplifier, 9 kHz - 230 MHzPMM
PMM 6000N Wide band RF power amplifier in the 9 kHz - 230 Mhz frequency range with an output level range of 10 W and 15 W from 150 kHz to 80 MHz, the PMM 6000N is the most convenient solution to raise the output power to the needed level.

Product description PDF formatEnglish

PMM  6630 - USB RF Power Sensor, 9 kHz - 3 GHzTop of page PMM
PMM 6630  
Accurate in laboratory, fast in manufacturing and solidly built for field applications

PMM 6630 is the ideal solution for RF power measurements in a wide variety of applications, including EMC immunity test systems to calibrate CDN and Clamps as well as to measure the input power of antennas or GTEM cells

Together with a directional coupler both direct and reflect power can be measured easily and precisely.

PMM 6630 is supplied with easy to use PC software to display the measurements in dBm, W, Vrms.

  • 9 kHz to 3 GHz frequency range
  • 100 nW to 1 W (-40 to +30 dBm) input  range
  • Excellent power linearity (0.2 dBm typical)
  • True RMS response across 70 dB dynamic range enables accurate CW and modulated power measurements
  • Low current consumption to save laptop battery
  • No need for a Reference Calibrator
  • Lightweight, convenient and easy to use with desktop and laptop PC

Product description PDF formatEnglish

Frequency range
9 kHz to 3 GHz
Power measurement range
100 nW to 1 W
-40 to +30 dBm
Max. input power
2 W peak envelope max. 300 ms
Power linearity
0.2 dB (-40 to +30 dBm @ 50 MHz; 25 °C ± 10°C)
Measurement accuracy 1, 2
< 0.35 dB
Measurement path
High: +30 to -9 dBm
Low: -9 to -40 dBm
1 dB typ. switching point hysteresis
Max. SWR
10 ÷ 300 kHz:                  1.10        +30 ÷ -9 dBm
>300 ÷ 100 MHz              1.05
>100 MHz ÷ 1 GHz          1.10
>1 ÷ 3 GHz                      1.25
10 kHz ÷ 3 GHz              1.20        -9  ÷ -40 dBm
Operating temperature 
-10°C ÷ +50°C
Power supply
5 VDC – 100 mA from USB port
RF connector
N male, 50 Ω
PC communication interface
USB 1.0 – 1.1 – 2.0
PC Software settings
N° of Averages (1 to 1024)
Correction Factor
Measuring units
dBm, W, Vrms
30 x 30 x 95 mm (WxHxP)
0.12 kg
1.     Max. SWR of source: 1.25
2.     Calculated with worst calibration uncertainities to the calibration factor of 0.17 dB


Company contacts
 Click here to see Authorized Dealers Worldwide
Company in Italy
 Click here to see Dealers and Companies represented in Italy
Product Catalog
Download the Product Catalog Short-Form Catalog
Online RMA
Check your RMA Status RMA Status
 Download page SoftwareFirmware
Join Mailing List
  email Address:

Valid XHTML 1.0 Transitional CSS Valid!       Top of Page    Copyright © Narda Safety Test Solutions S.r.l. MCMXCVIII-MMXVI. All rights reserved. PIVA 00972040091